If your gas furnace is nearing the end of its life, the real question is not which furnace to buy. It is whether you replace the furnace alone, or pair a new furnace with a central heat pump and turn the system into dual fuel.
FortisBC’s new dual fuel rebates make that second option worth pricing properly. The standard rebate pays up to $4,000, and income-qualified households can receive up to $8,000, for qualifying installations completed on or after October 15, 2026.
Here is how the two paths compare, and how to decide which one fits your home.
The Short Version
- Furnace replacement only: lowest upfront cost, no air conditioning unless you add it, no heat pump rebate.
- Dual fuel (heat pump + high-efficiency furnace): heating and cooling from one system, electric heat for most of the year, gas backup in cold snaps, and access to the FortisBC dual fuel rebate. It requires existing ductwork.
- A heat pump without the dual fuel pairing does not qualify for the dual fuel rebate. If you are considering that route, confirm which programs apply with FortisBC before buying equipment.
What Dual Fuel Actually Means
A qualifying dual fuel system pairs two pieces of equipment that work as one:
- An electric central ducted air-source heat pump
- A high-efficiency gas furnace at 95% efficiency or higher
The heat pump handles heating and air conditioning for most of the year. A connected thermostat switches to the gas furnace once outdoor temperature reaches the programmed changeover point. FortisBC caps that point at 5°C or lower for the Lower Mainland and Vancouver Island, and 2°C or lower for the Southern Interior and northern B.C., and the setting has to stay that way for the life of the equipment.
That detail is what separates a real dual fuel system from a heat pump with a furnace sitting next to it. The heat pump has to carry a meaningful share of the heating load, which is why FortisBC requires an approved heat-load calculation rather than rule-of-thumb sizing.
Where Dual Fuel Wins
You already have central ductwork. The air distribution system is the expensive part of any central installation. If it is already there and in reasonable condition, adding a heat pump is far simpler than starting from scratch.
Your furnace is 15 years old or older. That is not only the sensible replacement point; it is also a FortisBC eligibility requirement for the standard rebate.
You want air conditioning without a second system. A dual fuel install gives you central cooling from the same equipment that heats the house. Homes that have lived without A/C through recent Lower Mainland summers tend to notice this immediately.
You want a backup for cold snaps. The furnace stays available for the handful of days each winter when a heat pump is working hardest, which matters most outside the mildest coastal microclimates.
You are replacing anyway. The rebate improves the economics of a decision you were already going to make. It rarely justifies replacing a furnace that still has years left.
Where Dual Fuel May Not Fit
No ductwork, or ducts in poor condition. If the house heats with baseboards, a boiler, or radiators, a ducted system means new distribution. In that case a ductless mini-split is often the more practical route, though it does not qualify for the dual fuel rebate.
You have already claimed another rebate on the same work. FortisBC states that both dual fuel rebates cannot be combined with other FortisBC, provincial, or federally funded rebate programs. If you have applied for or received another rebate, confirm your eligibility before committing.
The numbers do not work after the rebate. A rebate reduces a cost; it does not create a reason to spend. Get a load calculation and a written quote for both options before deciding.
Your home is not eligible. The standard rebate requires a year-round primary residence at least 12 months old, on an eligible FortisBC gas account, in an eligible property type. The income-qualified rebate adds a home age of at least 10 years, a floor area of 3,500 square feet or less, an assessed value below $1.2 million, and household income limits by household size.
Equipment and Installer Requirements People Miss
Three requirements cause most rebate problems, and all three are avoidable if they are checked first:
- The exact combination must be listed. The heat pump, indoor unit, and furnace combination has to appear on the program’s Qualified Dual Fuel Systems List with a matching AHRI reference number. A qualifying heat pump with the wrong furnace pairing can fail the requirement.
- Minimum efficiency and capacity apply. The furnace must be 95% or higher. The heat pump needs at least 12,000 BTU (one tonne) of capacity and must meet FortisBC’s published thresholds: SEER 16 and Region IV HSPF 10.00, or SEER2 15.20 and Region IV HSPF2 8.50.
- The installer must be listed. Installation has to be completed by a Technical Safety BC licensed gas contractor who is a member in good standing of the Home Performance Contractor Network and listed for that rebate at the time of installation.
Paperwork: The Part Homeowners Underestimate
The rebate is not finished when the equipment is running. FortisBC requires the Dual Fuel Heating System Pre-Changeout and Commissioning Sheet, commissioning data submitted on site through the DSMAlly app on installation day, and installation photographs taken during the work. Those photos cannot be submitted after the fact.
You also need a detailed paid invoice showing the required equipment, permit, and contractor information, and the application has to reach FortisBC within six months of the invoice date. Processing can take up to 90 days.
That is why the contractor conversation should cover documentation, not just equipment. A good install that is poorly documented can still lose the rebate.
A Practical Way to Decide
- Confirm you have ductwork, and that it can handle a heat pump and furnace properly.
- Check the age of the existing furnace and confirm it is the primary heat source.
- Get a heat-load calculation. Not a square-footage guess.
- Ask for the exact model combination and its AHRI reference number, then verify it is on the qualified list.
- Confirm the contractor is licensed, network-listed, and taking part in the program.
- Price furnace-only and dual fuel side by side, with and without the rebate.
- Check rebate stacking rules before signing anything.
Frequently Asked Questions
Is dual fuel more expensive than a furnace replacement?
Yes. You are adding a heat pump, controls, and electrical work to a furnace replacement. The rebate reduces that difference. Whether the remaining gap is worth it depends on how much you value central air conditioning, lower heating costs through most of the year, and gas backup in cold weather.
Can I keep my existing furnace?
The standard rebate requires a new high-efficiency gas furnace at 95% or higher as part of the qualifying system. Keeping an older furnace does not meet the equipment requirement.
Does a ductless mini-split qualify?
No. The dual fuel rebate is built around a central ducted air-source heat pump integrated with a compatible gas furnace.
How long do I have to apply?
Six months from the invoice date. Installations must be completed on or after October 15, 2026 to qualify.
Will the rebate be approved automatically?
No. The homeowner applies and FortisBC decides. Eligibility should be checked before equipment is ordered, not after installation.
Talk It Through Before You Buy
Air Solutions installs and services heating and cooling systems across the Lower Mainland, including Vancouver, North Vancouver, West Vancouver, Burnaby, Coquitlam, and Surrey.
If you are weighing a furnace replacement against a dual fuel system, we will review your ductwork, run the numbers on both options, and confirm which equipment qualifies before anything is ordered. You can read the full program rules on our FortisBC dual fuel rebate page or the income-qualified rebate page, and see our heat pump installation service.
Book a free home comfort assessment and get a clear comparison for your home.


